The Showtec PRO-30 truss is made of 50mm alu-pipe with a thickness of 2mm and 16mm braces. This is the most used construction system for discotheques, stages, theatres and suitable for many more applications. The PRO-30 is available in following models: 2 point step system (S), 3 point triangle system (T) and 4 points square system (Q). The system elements are joined with help of conical connection coupling. Showtec offers 3 different coupling systems with different compatibility shown in the below overview. All Showtec Pro-30 truss systems are TÜV certificated. To recognize your truss system you can check the diameter at the pin insert part of your spigot. P Truss Compatible with standard Milos truss systems (Ø 29,8mm) F Truss Compatible with Prolyte truss systems (Ø 27,8mm) G Truss Compatible with Global Euro truss systems (Ø 29,0mm)Each PRO-30 truss item contains connector sets for every side, except one side.The Showtec PRO-30 truss is made of 50mm alu-pipe with a thickness of 2mm and 16mm braces. This is the most used construction system for discotheques, stages, theatres and suitable for many more applications. The PRO-30 is available in following models: 2 point step system (S), 3 point triangle system (T) and 4 points square system (Q). The system elements are joined with help of conical connection coupling. Showtec offers 3 different coupling systems with different compatibility shown in the below overview. All Showtec Pro-30 truss systems are TÜV certificated. To recognize your truss system you can check the diameter at the pin insert part of your spigot. P Truss Compatible with standard Milos truss systems (Ø 29,8mm) F Truss Compatible with Prolyte truss systems (Ø 27,8mm) G Truss Compatible with Global Euro truss systems (Ø 29,0mm)Each PRO-30 truss item contains connector sets for every side, except one side.Jellemzõk:A = 800 mm
Jellemzõk:Dimensions: 290 x 320 x 80 mmWeight: 2,5 kg
Strong roadproof housing DMX Controlled 3 different speeds Adjustable wind angle (horizontal, vertical, 45 degrees) Speed Control by DMX Manual Control Mode The AF-5 is Antari's very first special effects fan. The fan can work at 3 different speeds. On-board DMX makes the fan controllable by DMX. By DMX the fan can be switched on and off and also the 3 different speed modes can be selected (Low, Medium, High) The AF-5 is very suitable to use in combination with your fog, haze or snow machine.Jellem
The Showtec PRO-30 truss is made of 50mm alu-pipe with a thickness of 2mm and 16mm braces. This is the most used construction system for discotheques, stages, theatres and suitable for many more applications. The PRO-30 is available in following models: 2 point step system (S), 3 point triangle system (T) and 4 points square system (Q). The system elements are joined with help of conical connection coupling. Showtec offers 3 different coupling systems with different compatibility shown in the below overvi
The Showtec PRO-30 truss is made of 50mm alu-pipe with a thickness of 2mm and 16mm braces. This is the most used construction system for discotheques, stages, theatres and suitable for many more applications. The PRO-30 is available in following models: 2 point step system (S), 3 point triangle system (T) and 4 points square system (Q). The system elements are joined with help of conical connection coupling. Showtec offers 3 different coupling systems with different compatibility shown in the below overvi
The Showtec PRO-30 truss is made of 50mm alu-pipe with a thickness of 2mm and 16mm braces. This is the most used construction system for discotheques, stages, theatres and suitable for many more applications. The PRO-30 is available in following models: 2 point step system (S), 3 point triangle system (T) and 4 points square system (Q). The system elements are joined with help of conical connection coupling. Showtec offers 3 different coupling systems with different compatibility shown in the below overvi
The Showtec PRO-30 truss is made of 50mm alu-pipe with a thickness of 2mm and 16mm braces. This is the most used construction system for discotheques, stages, theatres and suitable for many more applications. The PRO-30 is available in following models: 2 point step system (S), 3 point triangle system (T) and 4 points square system (Q). The system elements are joined with help of conical connection coupling. Showtec offers 3 different coupling systems with different compatibility shown in the below overvi
Horizontal and vertical stand Fits iPad 1 iPad 2 Heavy duty 2 Swivel points This iPad holder has 2 swivel points to adjust the iPad in your desired position.Jellemzõk:Fits: iPad 1, iPad 2Dimensions: 245 x190 x 193 (LxWxH)Weight: 0.3Kg
Az antenna szimmetrizálót tartalmaz, kimenete F csatlakozó. Felhasználható az adóállomástól kb. 25 Km - es távolságig A rögzítő elemek cinkgalvanizáltak, az alumínium részek felületkezeltek. Szétszerelve, fóliacsomagolásban kerül kiszállításra. Frekvencia tartomány: FM (87,5-108 MHz) Elemek száma: 3 Nyereség: 4,5-5,5 dB(i) Előre/hátra viszony[dB]: 10-15 dB Irányszög: Horizontal 70° ; Vertical 110° Antenna hossz: 116 cm Kimenő impedancia[Ohm]: 75 Ohm Coax csatlakozás: "F" csatlakozó
Showtec Deco-22 truss is ideal for decoration applications in offices, sales rooms, product presentations or small clubs. It's a smaller sized lightweight version of the Pro-30. Main tubes are 32mm diameter, made from 1,5mm aluminium and braces are 10mm diameter made from 1,5mm aluminium. Deco-22 truss is available in 2 different designs, Triangle (T) and Square (Q). All Showtec Truss lengths are TUV certificated. Spigots, pins and springs are included.Jellemzõk:A = 400 mm
Showtec Deco-22 truss is ideal for decoration applications in offices, sales rooms, product presentations or small clubs. It's a smaller sized lightweight version of the Pro-30. Main tubes are 32mm diameter, made from 1,5mm aluminium and braces are 10mm diameter made from 1,5mm aluminium. Deco-22 truss is available in 2 different designs, Triangle (T) and Square (Q). All Showtec Truss lengths are TUV certificated. Spigots, pins and springs are included.Jellemzõk:A = 400 mmB = 400 mmC = 400 mm
Showtec Deco-22 truss is ideal for decoration applications in offices, sales rooms, product presentations or small clubs. It's a smaller sized lightweight version of the Pro-30. Main tubes are 32mm diameter, made from 1,5mm aluminium and braces are 10mm diameter made from 1,5mm aluminium. Deco-22 truss is available in 2 different designs, Triangle (T) and Square (Q). All Showtec Truss lengths are TUV certificated. Spigots, pins and springs are included.Jellemzõk:A = 400 mm
Showtec Deco-22 truss is ideal for decoration applications in offices, sales rooms, product presentations or small clubs. It's a smaller sized lightweight version of the Pro-30. Main tubes are 32mm diameter, made from 1,5mm aluminium and braces are 10mm diameter made from 1,5mm aluminium. Deco-22 truss is available in 2 different designs, Triangle (T) and Square (Q). All Showtec Truss lengths are TUV certificated. Spigots, pins and springs are included.Jellemzõk:A = 600 mm
Showtec Deco-22 truss is ideal for decoration applications in offices, sales rooms, product presentations or small clubs. It's a smaller sized lightweight version of the Pro-30. Main tubes are 32mm diameter, made from 1,5mm aluminium and braces are 10mm diameter made from 1,5mm aluminium. Deco-22 truss is available in 2 different designs, Triangle (T) and Square (Q). All Showtec Truss lengths are TUV certificated. Spigots, pins and springs are included.Jellemzõk:A = 400 mm
Showtec Deco-22 truss is ideal for decoration applications in offices, sales rooms, product presentations or small clubs. It's a smaller sized lightweight version of the Pro-30. Main tubes are 32mm diameter, made from 1,5mm aluminium and braces are 10mm diameter made from 1,5mm aluminium. Deco-22 truss is available in 2 different designs, Triangle (T) and Square (Q). All Showtec Truss lengths are TUV certificated. Spigots, pins and springs are included.Jellemzõk:A = 800 mm
6 individual controllable strobe sections Compact solid housing Horizontal bracket Vertical clamp mount positions COB technology The Ignitor 6 section is the successor of the Ignitor 6. With the ignitor 6 section you have total control of all individual strobe sections. Besides this new function the reflectors also have been improved which gives more output and more professional appearance. You also can use it as a standard strobe unit.Jellemzõk:Power Input: 100-250V AC, 50/60HzPower Consumption: 4