Jellemzõk:Max. rotation speed: 5RPMInput voltage: AC 230V-50HzPower consumption: 10 WattMax. rotation speed: 5 RPMMax. load: mirrorball 50 cm / 10 kgDMX channels: 2Weight: 5,5 kg
Complete mirrorball set in full-colour retail package containing: one mirrorball 20 cm, one mirrorball motor, one pinspot with colourwheel and lamp. Ready to use.Jellemzõk:
TÜV certification Including flightcase excl powersupply (60451) The Mirrorball Motor 500 kg is designated for the rotation of heavy loads up to 500 kg (mirrorball 200 cm). The extremely robust assembly and the high-quality components of the appliance guarantee a long service life.The motor comes in a flightcase with all relevant certificates.Jellemzõk:Loading capacity: 500 kgBreaking load: 6,3 t (tested)Rotation speed: 0,5-5 RpmTorque: 0,4 nmWeight: 3 kgCable length: 1,5 m
For professional use the unit must be installed according to the EN 60598-217 norms. A second safety-attachment must be used every time. The installation has to be approved by an expert before first use.Jellemzõk:Max. diameter mirrorball: 100 cmMax. weight: 40 kgRotation speed: ± 1 rpm
Jellemzõk:Max. diameter mirrorball: 30 cmMax. weight: 3 kgRotation speed: ± 2 rpmFor professional use the unit must be installed according to the EN 60598-217 norms. A 2nd safety-attachment must be used at all times. The installation has to be approved by an expert before first use.
For professional use the unit must be installed according to the EN 60598-217 norms. A second safety-attachment must be used every time. The installation has to be approved by an expert before first use.Jellemzõk:Max. diameter mirrorball: 20 cmMax. weight: 1 kgRotation speed: ± 7 rpmBattery-operated
For professional use the unit must be installed according to the EN 60598-217 norms. A second safety-attachment must be used every time. The installation has to be approved by an expert before first use.Jellemzõk:Input voltage: AC 230V-50HzPower consumption: 10 WattMax. diameter mirrorball: 50 cmMax. weight: 10 kgRotation speed: ± 1 rpmWeight: 5,5 kg
8 Individual programmable channel displays Control 8 LED fixtures up to 8 channels each Free patchable channels Memory for 16 scenes and 16 chases 2 Aux channels to control foggers and strobes The LED Commander Pro is the successor of the LED commander. The upgrade is simple but unique and very useful. The LED commander Pro has displays above each channel fader that shows the actual channel function. Because there are many different led fixtures and all with other channel settings it is hard to rem
10 channel switchboard. Schuko outlets on backside 10 A per channel. 15 A total load. Fuses on frontpanel.Jellemzõk:Dimensions: 482 x 135 x 120 mm (LxWxH) 19" x 3UWeight: 2,9 kg
4 Channel Chaser with 16 A max. load Background function 9 Built-in programs 4 modes: Hold dim, Hold sound, Program speed Master and channel dim faders Sound activatedJellemzõk:Power supply: AC 220V-240V, 50/60 HzPower consumption: 16 A max. Power connector: Cable without connectorOutput power: 5A each channel, 16A max.Output connector: 4 pcs schuko, 1 pcs bulginAnalog output: 0-10 Volt, 8 pole din connectorAudio output: XLR, CinchDimensions: 483 x 130 x 135 mm (LxWxH)Weight: 5,5 kg
The Showtec DMX Merge allows you to combine two DMX controllers to one DMX line or to use a second desk as back-up desk.The unit has 3 modes:1) HTP (High Take Precedence) In this case you can use two similar desks with the same addressing on one line. The DMX channel with the highest value has priority.2) Back-up mode. The unit is connected to two DMX desks. Channel A has priority. Once channel A fails or has no DMX channel B takes over the show.3) Merge mode. Two desks can be merged on one line. E.g. you
The classic effect from the seventies and yet timeless! All Showtec mirrorballs are equipped with a stabile plastic core and real glass facets. All mirrorballs, larger than 30 cm. are equipped with a safety-pin. Motorspeed is 2.5 - 3 RPMAttention: You should follow the BGV-C1 guidelines the motor should always be secured with a second safety attachment. Before your initial start-up, the installation should always be checked by a qualified technician.Jellemzõk:
The classic effect from the seventies and yet timeless! All Showtec mirrorballs are equipped with a stabile plastic core and real glass facets. All mirrorballs, larger than 30 cm. are equipped with a safety-pin. Motorspeed is 2.5 - 3 RPMAttention: You should follow the BGV-C1 guidelines the motor should always be secured with a second safety attachment. Before your initial start-up, the installation should always be checked by a qualified technician.Jellemzõk:
The classic effect from the seventies and yet timeless! All Showtec mirrorballs are equipped with a stabile plastic core and real glass facets. All mirrorballs, larger than 30 cm. are equipped with a safety-pin. Motorspeed is 2.5 - 3 RPMAttention: You should follow the BGV-C1 guidelines the motor should always be secured with a second safety attachment. Before your initial start-up, the installation should always be checked by a qualified technician.Jellemzõk:
The classic effect from the seventies and yet timeless! All Showtec mirrorballs are equipped with a stabile plastic core and real glass facets. All mirrorballs, larger than 30 cm. are equipped with a safety-pin. Motorspeed is 2.5 - 3 RPMAttention: You should follow the BGV-C1 guidelines the motor should always be secured with a second safety attachment. Before your initial start-up, the installation should always be checked by a qualified technician.Jellemzõk:
Compact 6 channel DMX controller Master dim fader Battery operated Easy to use Ideal for exibitions The SDS-6 is a small battery operated 6 channel DMX controller. It is very suitable for easy applications such as exhibitions, small shops as well for testing of your DMX equipment. 6 individual Channel Fader 1 Master Fader 6 DMX Channels (1 to 6) Compact Design Simple OperationJellemzõk:Power input: DC 9V - 15V, 100mA minimumDMX Output: 3 Pin Female DMX ConnectorDMX Polarity: 2-, 3+Battery Type: