Jellemzõk:Dimensions: 180 x 120 mmOuter adapter: 35 mmHeight: 73 mm
Jellemzõk:Outer adapter: 39mm Mounting hole Ø: 42mm Mounting plate Ø: 110mm Height: 95,2 mmInner adapter for tube: 35 mmInner height for tube: 88mm
Conductor drains mm: OFC 28 x 0,10 Conductor insulation: PE red+blue Conductor insulation: 1,5 ( in mm) Filler material: paper + cotton yarn 1st shield: OFC twisted 83 x 0,12 2nd shield: - Outer isolation: PVC black, blue, red, yellow, green Outer isolation in mm: 6 Conductor resistance: 80 Ohm/Km Shield resistance: 25 Ohm/Km Capacity Inner conductor: 45 pF/m Cap. Inner conduct. Shield/Inner conduct.: 112 pF/m Working temperature: -20~60 °C (min. / max.) Working Voltage overflash: 30V Nom Impedance:
Vezet k : OFC 10 x 0,10 Szigetel s: PE red+white Szigetel s: 1,0 ( in mm) Árny kolás: OFC sodrott 40 x 0,12 Külsõ szigetel s: PVC fekete Külsõ szigetel s átm rõ: 5 mm Vezet k ellenállása: 160 Ohm/Km Belsõ vezet kek kapacitása: 60 pF/m Mûköd si hõm rs klet: -20~60 °C (min. / max.) Impedancia: 110 Ohm Conductor drains mm: OFC 10 x 0,10 Conductor insulation: PE red+white Conductor insulation: 1,0 ( in mm) Filler material: - 1st shield: OFC twisted 40 x 0,12 2nd shield: - Outer isolation: PVC matte black
Heavy duty stand Quick and easy to build Compact and lightweight Compatible with GS system The Mobile DJ Truss Stand is a compact and lightweight solution to create a decorative stand for lightning. It's made of 50mm tube 290mm step truss parts which makes this stand heavy duty. The stand contains 8 parts and is quick and easy to build. With the optional flightcase (D7598) it is the ideal solution for mobile dj's and musicians.Jellemzõk:Set contains: 2 x Base-truss 2 x Corner piece 4 x LengthHeight:
Jellemzõk:Outer dimensions: 480x385x45mmInner dimensions: 412x367x42mm
Sal MW MA06 univerzális 600mA 3-12V adapter Hálózati adapter, 3-12 V DC MW MA06 Az MW MA 06 Hálózati adapter 3-12 V DC, 600 mA áram leadásra alkalmas. Feszültsége szabályozható 3 / 4,5 / 5 / 6 / 7,5 / 9 / 12 V között. Működését LED jelző fény mutatja. Polaritás-állítási lehetőséggel rendelkezik. Tartozékként szállítjuk a hozzá tartozó 6 db-os csatlakozókészletet. EuP kompatibilis.
YD-AC17 adapter Model: YD AC-17 Input: 220-230VAC 50Hz Output: 17.5VACX2 160 mA 5.5VA
This adapter turns your stand into a stand for use with standard TV-spigots in order to make more flexible, professional and stable rigging. The adapter fits on stands with a tube diameter of 35mmJellemzõk:The adapter fits on stands with a tube diameter of 35mm.
RH Sound 160mA 2x17V Adapter keverőhöz Hálózati adapter keverők részére Bemenet: 230V / 50 Hz Kimenet: 2 x 17,5V /160 mA
The Gig stand adapter comes with two 5mm screws needed for mounting on Gig-62, Gig-83CFX or Gig-104C mixers. It has a 5/8 thread which makes it easy to assamble the adapter on any microphone stand. Make sure to use stable mic stands and tighten the angle adjustment screw to avoid the unit tipping over.Jellemzõk:Measurements: 130x85x45mmWeight: 0,270KgThread: 5/8
Warwick Rock Power NT-50 adapter Adapter 5-ös elosztóval.
SCART AV adapter kapcsolóval Az adapterrel egy TV-készülék SCART bemenetéhez csatlakoztatja egy másik készülék 3x RCA vagy S-Video kimenetét. A csomag tartalma 1 db SCART adapter
The primary insulation, consisting of a cross-linked polymer gel and extremely strong plastic insulating housing, make the Class 2, in accordance with the definitions contained in CEI Regulation 64-8. The joint, tested in accordance with the most important international specifications with repeated bending and twisting cycles and immersion in water, was found to comply with the mechanical, electrical and sealing requirements necessary for accessories for plastic cables. The joint and its components have n
The primary insulation, consisting of a cross-linked polymer gel and extremely strong plastic insulating housing, make the Class 2, in accordance with the definitions contained in CEI Regulation 64-8. The joint, tested in accordance with the most important international specifications with repeated bending and twisting cycles and immersion in water, was found to comply with the mechanical, electrical and sealing requirements necessary for accessories for plastic cables. The joint and its components have n
The primary insulation, consisting of a cross-linked polymer gel and extremely strong plastic insulating housing, make the Class 2, in accordance with the definitions contained in CEI Regulation 64-8. The joint, tested in accordance with the most important international specifications with repeated bending and twisting cycles and immersion in water, was found to comply with the mechanical, electrical and sealing requirements necessary for accessories for plastic cables. The joint and its components have n