Jellemzõk:Maximum Load: 75 kgWeight: 0,9kgWidth of sliding holes: 70mmHeight of clamp: 165mmMinimum distance of two mounting holes: 72mmMaximum distance of two mounting holes: 194mmWidth of mountingprofile: 50mmLength of mountingprofile: 255mm
6-10 inch universal fit Flexible H/V position adjustment Table clamp, foot plate, microphone stand clamp max height 240mm The DAP Multifunctional Tabled Stand is a one-in-all solution for tablets. Due to the 3-way adjustable holder with rubber grips it fits many types of tablets from 6-10 inches. The holder is connected on the accessory by an mechanism with 2 ball joints. This makes it possible to adjust it easily in any position horizontal or vertical. There are 3 accessories included, table clamp
Half coupler weld with 500mm pipe Suitable as moving head hanger Jellemzõk:Tube size: 48 / 3 mmTube lenght: 500 mmSafe working load: 40 kgWeight: 0,83 kgDimensions: 500 x 120 x 48 mmMaterial: Aluminium
16 Selectable frequencies Dynamic, moving coil Powered by AA batteries Diversity 8 Colored endcaps The DAP EM-16 is a hand-held transmitter with cardioid dynamic microphone head which can be used in combination with the DAP receiver ER-216. The EM-16 is suitable for vocal and speech transmission and can handle up to 16 switchable transmission frequencies in the UHF band.Jellemzõk:Type: Dynamic, moving coil.Polar pattern: CardioidFrequency Response: 50-16.000 HzSensitivity (1000 Hz): 2,2 mV/Pa* (*1
193 Selectable frequencies Dynamic, moving coil Lock-on function Powered by AA batteries True diversity, minimum dropouts The DAP EM-193 is a hand-held transmitter with cardioid dynamic microphone head which can be used in combination with the DAP receiver ER-1193. The EM-193 is suitable for vocal parts and voice transmission and can handle up to 193 switchable transmission frequencies in the UHF band.Jellemzõk:Type: Dynamic, moving coil.Polar pattern: Cardioid Freq. Response: 50-16.000 HzMax. SPL:
The heavy duty Pipe Clamp is an ideal clamp for rental use and fixed installations. It has a black finishing in order that it is not visible in your truss or ceiling. The knob has an ergonomic design and makes it possible to secure your fixture to the truss without hurting your fingers.Jellemzõk:
Complete ready to use mic set 6M XLR Cable Stand with metal base part The MS-4 microphone set is a complete microphone set for professionals. It includes a dynamic microphone, a telescope microphone stand with metal base, flexible rubber microphone clamp, 6m Cable and a bag. This set is a ready to use solution for on stage use.Jellemzõk:Element: Moving Coil DynamicPolar pattern: CardioidFrequency response: 50Hz - 16KhzOutput impedance: 500 Ohm (1 KHz)
The universal foam is the foam that is used in the cases D7491B D7492B and is now also separate available in 5 or 10cm thickness. The universal foam sheets can be used to fill your own cases and cut out any shape you like to make your gear fit. The cut out pieces are 10x10x10mm.Jellemzõk:Dimensions: 1200 x 600 x 50mmCutting length: 15 x 15 x 15mmWeight: 0,9Kg
Easy set-up and use Suited for 40cm and 80cm shooters Special clamp to secure electric cannons.Jellemzõk:
Complete ready to use mic set 6M XLR Cable Microphone with on/off switch D8301 Microphone stand The MS-3 microphone set is a complete microphone set for starters. It includes a dynamic microphone with on / off switch, the D8301 stand with flexible microphone clamp and a 6m Cable. It is a very affordable set which is ideal for schools, musicians and mobile Dj's.Jellemzõk:Microphone stand: D8301Cable: XLR male / female 6MClamp: Flexible rubberMicrophoneSwitch: On / Off Element: Moving Coil DynamicPolar
60's sound character The VM-60 is a dynamic microphone with the performance and looks straight out of the '50s and '60s. It´s a vocal microphone and has a moving coil with a cardioid pattern. When you use the VM-60 mic you will experience the sound of the 60's again.Jellemzõk:Type: Dynamic, moving coilFreq. response: 40 Hz - 18 KHzPolar pattern: CardioidSensitivity: -52dB (0dB=1V/Pa 1000Hz)Max. SPL: 137dBImpedance: 300 Ohm +/- 30%Power supply: Not requiredConnector: 3 Pole XLRDimensions: 190 x 75 x 75 m
**Stable TC1 Multi Clamp dob hardver** Ismerje meg a Stable TC1 Multi Clamp dob hardvert, amely a professzionális zenészek és stúdiók számára készült, akik keresik a maximális stabilitást és megbízhatóságot dobberendezésük során. Ez a multi-bilincs egyedülálló kialakításának köszönhetően lehetővé teszi a különböző tartozékok, mint például mikrofonállványok, digitális eszközök vagy egyéb kiegészítők egyszerű és stabil rögzítését a dobberendezéshez. A TC1 Multi Clamp minőségi és ellenálló öntvényből készü
DMX splitter for 4 outputs Electrical isolation between in and output DMX Indication LEDs on in- outputs 3 5P XLR in- outputs M10 nut at backside for truss clamp The DB models from Showtec are universal DMX-512 optical splitters. They are designed to distribute the incoming DMX signal, in daisy chain configurations, into multiple separate outputs with an additional -Tru" port. They can be mounted in any 19" rack or into the truss by the M10 nut on the rear end of the unit. It has clear LEDs to sho
Flying high with safety-cables:Parcans, speakers, moving heads, mirrorballs, trussing, brackets, projectors, flatscreen monitors, all different products with one thing in common. As soon as they are being used, either static or as moving effect, in elevated positions or over people or crowd you are required to use an independent secondary safety-device according to BGV-C1 and VGB regulations to ensure the safety of the visitors of your venue. Safety-cables need to be used in all these cases to secure your
Flying high with safety-cables:Parcans, speakers, moving heads, mirrorballs, trussing, brackets, projectors, flatscreen monitors, all different products with one thing in common. As soon as they are being used, either static or as moving effect, in elevated positions or over people or crowd you are required to use an independent secondary safety-device according to BGV-C1 and VGB regulations to ensure the safety of the visitors of your venue. Safety-cables need to be used in all these cases to secure your
Flying high with safety-cables:Parcans, speakers, moving heads, mirrorballs, trussing, brackets, projectors, flatscreen monitors, all different products with one thing in common. As soon as they are being used, either static or as moving effect, in elevated positions or over people or crowd you are required to use an independent secondary safety-device according to BGV-C1 and VGB regulations to ensure the safety of the visitors of your venue. Safety-cables need to be used in all these cases to secure your