Villámvédő patron (Signal)

Villámvédő patron (Signal)

Villámvédő patron koax hálózatra

Digitális földfelszíni (DVB-T/T2) és műholdas vétel (DVB-S/S2) esetében is egy hasznos kiegészítője a rendszernek. Egy esetleges villámcsapás bekövetkeztekor ez az eszköz ami meghibásodik, ezzel megóvva a koax hálózaton lévő eszközöket.


Főbb tulajdonságok:



Szerszám felszerelhető
Felfogja az esetleges túlfeszültséget
Digitális földfelszíni és műholdas rendszerben is használható


Kiknek ajánljuk?

Mindenkinek ajánljuk aki most telepíti vagy éppen karbantartja a digitális földfelszíni (DVB-T/T2) rendszerét és szeretne egy plusz védelmet a koax hálózaton érkező túlfeszültség ellen.

megvesz
Villámvédő patron

Villámvédő patron

A tetőn elhelyezett antennákat szükségesek ellátni megfelelő villámvédelemmel, függetlenül az elhelyezéstől és időjárástól. Ugyanis egy esetleges villámcsapás bekövetkeztekor fellépő feszültség képes a teljes hálózatot tönkretenni. Kis átmenő csillapítás (≤ 1.2 dB) Beépített "O" gyűrűs konstrukció Magas vízállóság

megvesz
FP05

FP05

FP Power Signal cables for DMX light gear. The ideal solution for quick and easy connecting of your DMX device with power and DMX signal, no more cable mess. All 3 models have xlr-m to xlr-f signal connectors and different types of current-connectors. Please also check our FP power Signal cables for audio and the new range Showtec powercon Light cables with XLR, RJ45, and Ethercon connectors.Jellemzõk:

megvesz
FP04 - Schuko/XLR M - IEC/XLR F

FP04 - Schuko/XLR M - IEC/XLR F

FP Power Signal cables for DMX light gear. The ideal solution for quick and easy connecting of your DMX device with power and DMX signal, no more cable mess. All 3 models have xlr-m to xlr-f signal connectors and different types of current-connectors. Please also check our FP power Signal cables for audio and the new range Showtec powercon Light cables with XLR, RJ45, and Ethercon connectors.Jellemzõk:

megvesz
FP06 - Schuko/XLR M - Powercon/XLR F

FP06 - Schuko/XLR M - Powercon/XLR F

FP Power Signal cables for DMX light gear. The ideal solution for quick and easy connecting of your DMX device with power and DMX signal, no more cable mess. All 3 models have xlr-m to xlr-f signal connectors and different types of current-connectors. Please also check our FP power Signal cables for audio and the new range Showtec powercon Light cables with XLR, RJ45, and Ethercon connectors.Jellemzõk:

megvesz
FP05 - Schuko/XLR M - Schuko/XLR F

FP05 - Schuko/XLR M - Schuko/XLR F

FP Power Signal cables for DMX light gear. The ideal solution for quick and easy connecting of your DMX device with power and DMX signal, no more cable mess. All 3 models have xlr-m to xlr-f signal connectors and different types of current-connectors. Please also check our FP power Signal cables for audio and the new range Showtec powercon Light cables with XLR, RJ45, and Ethercon connectors.Jellemzõk:

megvesz
FL09 - bal. XLR/M 3 p. > XLR/F 3 p.

FL09 - bal. XLR/M 3 p. > XLR/F 3 p.

To avoid unnecessary signal-distortion with digital signal-transmission it is advisable to use the DAP FL09 (Digital AES-EBU norm) 110 Ohm cable.Jellemzõk:

megvesz
Multi Exchanger

Multi Exchanger

Convert the signal from DMX-512 to 72 CH. ANALOGUE output.• Convert the signal from MIDI to 72 CH. ANALOGUE output.• The front panel alpha-numeric display shows the DMX start address and programming options.• The last scene remains when DMX disappears.• Pre-store a scene and is available for emergency.• Memory backup with EEPROM.• CHASE function can be selected from 1 to 72 channel speed control.• Select ANALOGUE output from +(-)10V, +(-)12V and +(-)15V.• Receive NOTE ON/OFF signal of MIDI.Jellemzõk:Volt

megvesz
FL08 - bal XLR/M 5 p. > XLR/F 5 p.

FL08 - bal XLR/M 5 p. > XLR/F 5 p.

Prefab DMX/digital cable with 5 poles. For light and multipurpose use with excellent quality and good specifications.To avoid unnecessary signal-distortion with digital signal-transmission it is advisable to use the DAP FL09 (Digital AES-EBU norm) 110 Ohm cable.Jellemzõk:

megvesz
ADI-200

ADI-200

• Roadproof housing with rubber feet• Low distortion• Ground lift• 20dB Attenuation switch The ADI-200 active DI box will help you with instruments that have a low level and high impedance output. It will convert the output to a more suitable signal without interfering or modifying the signal. With the ADI-200 your signal can be driven up to long cable lengths without any problems. It offers a clean and undistorted signal as well as reliability on touring stages. It works on a 9V battery or with phantom p

megvesz
FP08 - Schuko/XLR F - IEC/XLR M

FP08 - Schuko/XLR F - IEC/XLR M

Now finally available as prefabcable: power and signal incorporated in one single cable! No more cable-"mess", just one cable to your active speaker, mixingconsole etc. Currently there are three different models available, all designed for use with audio equipment. All 3 models have xlr-m to xlr-f signal connector and different types of current-connectors. Please note that with a little work these cables can also be used with lightequipment nevertheless you can expect to see more audio and lightsolutions

megvesz
FP10 - Schuko/XLR M - Powercon/XLR F

FP10 - Schuko/XLR M - Powercon/XLR F

Now finally available as prefabcable: power and signal incorporated in one single cable! No more cable-"mess", just one cable to your active speaker, mixingconsole etc. Currently there are three different models available, all designed for use with audio equipment. All 3 models have xlr-m to xlr-f signal connector and different types of current-connectors. Please note that with a little work these cables can also be used with lightequipment nevertheless you can expect to see more audio and lightsolutions

megvesz
Antenna Booster

Antenna Booster

The Antenna Booster creates more flexibility for your Eclipse range wireless microphones. It boosts the signal so that it is possible to extend the range of use of your microphone. It improves the S/N ratio and protects your signal for interference. It can be mounted on the wall or on a normal microphone stand. This antenna booster only works in combination with the power supply of the antenna distributor D1444.Jellemzõk:

megvesz
FP09 - Schuko/XLR F - Schuko/XLR M

FP09 - Schuko/XLR F - Schuko/XLR M

Now finally available as prefabcable: power and signal incorporated in one single cable! No more cable-"mess", just one cable to your active speaker, mixingconsole etc. Currently there are three different models available, all designed for use with audio equipment. All 3 models have xlr-m to xlr-f signal connector and different types of current-connectors. Please note that with a little work these cables can also be used with lightequipment nevertheless you can expect to see more audio and lightsolutions

megvesz
Triax ERW9

Triax ERW9

ERW 9 földelő sín digitális földfelszíni és műholdas rendszerekhez egyaránt Ez az egyszerű kiegészítő számos bosszúságtól képes megmenteni egy esetleges túlfeszültség esetén. Ha a közelben villámcsapás történik, akkor nagy eséllyel tud indukálódni olyan túlfeszültség, ami megfelelő védelem nélkül képes kárt okozni a koax hálózaton lévő eszközökön. Főbb tulajdonságok: Könnyű és egyszerű beszerelhetőség 4 F csatlakozó Digitális földfelszíni és műholdas rendszerekhez ajánlott Kiknek aj

megvesz
Triax ERW21 - koax átvezető sor

Triax ERW21 - koax átvezető sor

21 F csatlakozóval rendelkező földelő sín koax rendszerhez A villám és a túlfeszültség védelem fontos szempont egy TV rendszer kialakításánál. Érdemes erre már elején gondolni, de soha nem késő beszerelni ilyen védelmet otthonra. Digitális földfelszíni és műholdas rendszerek esetében is használható. Főbb tulajdonságok: 21 F csatlakozó Digitális földfelszíni tv antenna és parabola antenna esetén is használható Egyszerű és könnyű beszerelhetőség Kiknek ajánljuk? Bárkinek aki rendel

megvesz