This microphone stand is ideal for practice and home use.Jellemzõk:
Complete ready to use mic set 6M XLR Cable Microphone with on/off switch D8301 Microphone stand The MS-3 microphone set is a complete microphone set for starters. It includes a dynamic microphone with on / off switch, the D8301 stand with flexible microphone clamp and a 6m Cable. It is a very affordable set which is ideal for schools, musicians and mobile Dj's.Jellemzõk:Microphone stand: D8301Cable: XLR male / female 6MClamp: Flexible rubberMicrophoneSwitch: On / Off Element: Moving Coil DynamicPolar
Complete ready to use mic set 6M XLR Cable Stand with metal base part The MS-4 microphone set is a complete microphone set for professionals. It includes a dynamic microphone, a telescope microphone stand with metal base, flexible rubber microphone clamp, 6m Cable and a bag. This set is a ready to use solution for on stage use.Jellemzõk:Element: Moving Coil DynamicPolar pattern: CardioidFrequency response: 50Hz - 16KhzOutput impedance: 500 Ohm (1 KHz)
The Gig stand adapter comes with two 5mm screws needed for mounting on Gig-62, Gig-83CFX or Gig-104C mixers. It has a 5/8 thread which makes it easy to assamble the adapter on any microphone stand. Make sure to use stable mic stands and tighten the angle adjustment screw to avoid the unit tipping over.Jellemzõk:Measurements: 130x85x45mmWeight: 0,270KgThread: 5/8
Superlux DS01 Microphone Table Stand mikrofon állvány: 3 lábú asztali mikrofon állvány, stabil fém konstrukció, műanyag lábvégek, 9 cm magasság, súly: 0.1 kg, fekete szín
Get those stands organised with this straightforward solution from DAP. The stand-bag provides an affordable way of carrying your hardware.Jellemzõk:Dimensions: 1100 x 230 x 150 mm (LxWxH)
6-10 inch universal fit Flexible H/V position adjustment Table clamp, foot plate, microphone stand clamp max height 240mm The DAP Multifunctional Tabled Stand is a one-in-all solution for tablets. Due to the 3-way adjustable holder with rubber grips it fits many types of tablets from 6-10 inches. The holder is connected on the accessory by an mechanism with 2 ball joints. This makes it possible to adjust it easily in any position horizontal or vertical. There are 3 accessories included, table clamp
Height could be adjusted Can be fixed or locked on the table Material: Metal Excl. MicrophoneJellemzõk:Microphone Cable attachedBalanced and shielded cable, XLR connectorMicrophone and shockmount not includedDimensions: height adjustment 1650 - 2200mmWeight: 9,2 kgMinimum microphone weight: 0,4 Kg (counterweight spring)
8 Combined Mic Line inputs EQ with mid sweep Phantom power Selectable Hi-pass filter The Compact 8.1 is a high quality 19" 1U microphone line mixer. With some smart features it distinguishes itself from other compact mixers. All inputs can be used for microphone or line level inputs and have high pass filters and phantom power selections for each input separately. It has a balanced master output, a record output and a monitor output. The headphones level also influences the monitor output which makes
The Antenna Booster creates more flexibility for your Eclipse range wireless microphones. It boosts the signal so that it is possible to extend the range of use of your microphone. It improves the S/N ratio and protects your signal for interference. It can be mounted on the wall or on a normal microphone stand. This antenna booster only works in combination with the power supply of the antenna distributor D1444.Jellemzõk:
The DAP microphone DM-20 handles extreme low-frequency volume levels and is specially designed and tuned to capture the low punch of low-frequency instruments like kick-drums or bass-amps. With integral stand mount.Jellemzõk:Type: Dynamic, moving coil.Polar pattern: Super Cardioid Freq. response: 20 to 12.500 HzSensitivity (1000 Hz): 2,2 mV/Pa* (*1 Pa = 94 dB SPL)Max. SPL: 134 dB (THD ? 1% 1000 Hz)Impedance: 500 OhmPower supply: noneConnector: 3p. XLR (male-type)Accessories: Treat adapter 5/8, 4/8, 3/8 In
Jellemzõk:Height: 415-660 mmArm Length: 580-890 mmBase: MetalTwo Section boom-armErgonomic rubber grips
Jellemzõk:Height: 905-1600 mmArm Length: 580-900 mmBase: MetalTwo section boom-arm.Ergonomic rubber grips
Mikrofonállványra szerelhető pengető tartó. ( Pengetők nélkül )
Compact transport design 2 keyboard layers with adjustable heights Mic thread adapter on top This keyboard stand is compact to transport, easy to setup and looks very stylish compared to the usual stands. It can hold 2 keyboards in adjustable heights. The feet are inside the column and the tri-bar arms can also be folded into the column. At the top of the column is a microphone adapter that can be used to mount a gooseneck.Jellemzõk:Maximum load: 30Kg on each keyboard layerWeight: 7,75 KgMeasurements
The DAP microphone CM-50 is an extremely rugged supercardioid back electret condenser microphone for professional lead/backup vocal use in live performance with built-in-two stage anti-pop filter which reduces wind and breathing noise. Due to its concept it is an excellent choice for vocals on stage, studio recording and mid-high frequency instrument miking. Adapter inclusive!Jellemzõk:Type: Back Electret CondenserPolar pattern: Super CardioidFreq. response: 50~16000 HzSensitivity (1000 Hz): 4,5 mv/Pa* (*