Get those stands organised with this straightforward solution from DAP. The stand-bag provides an affordable way of carrying your hardware.Jellemzõk:Dimensions: 1100 x 230 x 150 mm (LxWxH)
Complete ready to use mic set 6M XLR Cable Microphone with on/off switch D8301 Microphone stand The MS-3 microphone set is a complete microphone set for starters. It includes a dynamic microphone with on / off switch, the D8301 stand with flexible microphone clamp and a 6m Cable. It is a very affordable set which is ideal for schools, musicians and mobile Dj's.Jellemzõk:Microphone stand: D8301Cable: XLR male / female 6MClamp: Flexible rubberMicrophoneSwitch: On / Off Element: Moving Coil DynamicPolar
The Gig stand adapter comes with two 5mm screws needed for mounting on Gig-62, Gig-83CFX or Gig-104C mixers. It has a 5/8 thread which makes it easy to assamble the adapter on any microphone stand. Make sure to use stable mic stands and tighten the angle adjustment screw to avoid the unit tipping over.Jellemzõk:Measurements: 130x85x45mmWeight: 0,270KgThread: 5/8
Complete ready to use mic set 6M XLR Cable Stand with metal base part The MS-4 microphone set is a complete microphone set for professionals. It includes a dynamic microphone, a telescope microphone stand with metal base, flexible rubber microphone clamp, 6m Cable and a bag. This set is a ready to use solution for on stage use.Jellemzõk:Element: Moving Coil DynamicPolar pattern: CardioidFrequency response: 50Hz - 16KhzOutput impedance: 500 Ohm (1 KHz)
This microphone stand is ideal for practice and home use.Jellemzõk:
This adapter turns your stand into a stand for use with standard TV-spigots in order to make more flexible, professional and stable rigging. The adapter fits on stands with a tube diameter of 35mmJellemzõk:The adapter fits on stands with a tube diameter of 35mm.
No cables or winch Load 80 kg Lightweight design Showtec introduces a new revolutionary range of stands. The new Basic series offer true wind up stands with a high load capacity of 80 kg but without the need of any cable. Due to this revolutionary concept the stand is more safe and reliable than any other stand in the market. All components are produced in Europe and are compliance with TUV and GS standards.Jellemzõk:Maximum load: 80 kgMaximum height: 3,80mMinimum height: 1,80mDiameter of ground space
Compact transport design 2 keyboard layers with adjustable heights Mic thread adapter on top This keyboard stand is compact to transport, easy to setup and looks very stylish compared to the usual stands. It can hold 2 keyboards in adjustable heights. The feet are inside the column and the tri-bar arms can also be folded into the column. At the top of the column is a microphone adapter that can be used to mount a gooseneck.Jellemzõk:Maximum load: 30Kg on each keyboard layerWeight: 7,75 KgMeasurements
No winch and cable Excellent price - quality ratio Load 80 kg Showtec introduces a new revolutionary range of stands. The new Basic series offer true wind up stands with a high load capacity of 80 kg but without the need of any cable. Due to this revolutionary concept the stand is more safe and reliable than any other stand in the market. All components are produced in Europe and are compliance with TUV and GS standards.Jellemzõk:Maximum load: 80 kgMaximum height: 2,80mMinimum height: 1,5mDiameter of
Superlux DS01 Microphone Table Stand mikrofon állvány: 3 lábú asztali mikrofon állvány, stabil fém konstrukció, műanyag lábvégek, 9 cm magasság, súly: 0.1 kg, fekete szín
6-10 inch universal fit Flexible H/V position adjustment Table clamp, foot plate, microphone stand clamp max height 240mm The DAP Multifunctional Tabled Stand is a one-in-all solution for tablets. Due to the 3-way adjustable holder with rubber grips it fits many types of tablets from 6-10 inches. The holder is connected on the accessory by an mechanism with 2 ball joints. This makes it possible to adjust it easily in any position horizontal or vertical. There are 3 accessories included, table clamp
Height could be adjusted Can be fixed or locked on the table Material: Metal Excl. MicrophoneJellemzõk:Microphone Cable attachedBalanced and shielded cable, XLR connectorMicrophone and shockmount not includedDimensions: height adjustment 1650 - 2200mmWeight: 9,2 kgMinimum microphone weight: 0,4 Kg (counterweight spring)
The Antenna Booster creates more flexibility for your Eclipse range wireless microphones. It boosts the signal so that it is possible to extend the range of use of your microphone. It improves the S/N ratio and protects your signal for interference. It can be mounted on the wall or on a normal microphone stand. This antenna booster only works in combination with the power supply of the antenna distributor D1444.Jellemzõk:
Jellemzõk:use (70325) Stand Adapter for mounting on Light Stands with 35mm upper tube.
The DAP microphone DM-20 handles extreme low-frequency volume levels and is specially designed and tuned to capture the low punch of low-frequency instruments like kick-drums or bass-amps. With integral stand mount.Jellemzõk:Type: Dynamic, moving coil.Polar pattern: Super Cardioid Freq. response: 20 to 12.500 HzSensitivity (1000 Hz): 2,2 mV/Pa* (*1 Pa = 94 dB SPL)Max. SPL: 134 dB (THD ? 1% 1000 Hz)Impedance: 500 OhmPower supply: noneConnector: 3p. XLR (male-type)Accessories: Treat adapter 5/8, 4/8, 3/8 In
Jellemzõk:Height: 415-660 mmArm Length: 580-890 mmBase: MetalTwo Section boom-armErgonomic rubber grips